Parts are moulded in the foundry plant, and then they are cut, deburred, trimmed and finished.
It all happens within our facilities, which implies journey savings.
It all happens within our facilities, which implies journey savings.
Slugs and sprues are cut in an endless bandsaw.
Parts are finished in two trimming-polishing machines connected to an aluminium dust centrifugal collector.
We have 19 moulding devices:
- automated, with a hydraulic lock.
- Horizontal opening
- Vertical opening
- Hand-operated
- Special features
Suitable for 200 mm up to 1,500 mm thick moulds.
Aluminium foundry is made in 3 crucible furnaces of up to 800 kg unit capacity.
6 electric maintenance furnaces of 800 kg unit capacity are available for the operator.
Best castability of aluminium can be obtained by refining each cast using a refining stand-alone device.
Moulds are cleaned with a sandslinger. This prevents the mould from premature wear due to metal brush use.
Parts cast in a sand mould are introduced into a special furnace to ease subsequent sand removal.
A special vibrating device is available as needed.
3 crucible furnaces with a revolving system onto the casting peak.
- Automated gaz burning.
- Monolithic refractory.
- High performance melting.
- 200-800 kg capacities and above.
- Best quality with lowest metal loss output material.
- Easy crucible change system
- Heat recovery option to increase performance and work platform.
6 maintenance crucible furnaces
- Highly reliable
- Low cost design
- Low dross loss
- 100 to 800 kg capacities
- High power melting unit
- Low cost maintenance
- High quality metal
Coniex S8140 compressed air sandslinger designed for moulds cleaning.
Rosler EC revolving vibrator
Provides high speed polish and best surface finishing result.
Built-in ramp allows optimum process for small and medium parts.
TP chamber furnace for sand moulds' resin flash-off.
Highly efficient chamber with controlled atmosphere.
Highly efficient chamber with controlled atmosphere.
Letag electro polishing-trimming machine
Endless bandsaw
6750 mm long band
FDU foundry refining unit
- Ecological refining
- Grading decrease
- Alloys purification